fbpx

VBOX Video HD2

Our most sophisticated race car video data logger yet, VBOX Video HD2 features 1080p 60fps video, real-time synchronized video and data with graphical overlay.

  • Dual-camera input with live preview
  • 1080p 60 fps HD video
  • Real-time HD graphic overlay
  • Up to 80 CAN channels
  • HDMI option for live video streaming

Features

Two Camera Inputs

2 Camera Inputs

1920 x 1080p at 30 (default) or 60 frames/second; waterproof
CAN Bus Input

CAN Bus Input

Log up to 80 channels of vehicle CAN data, such as throttle angle, RPM, and brake pressure.
HD Video

High Definition Video

Sony Exmorâ„¢ HD sensor gives superb color reproduction and great night sensitivity
Graphic Overlay

Real-time Graphics

Customizable real-time graphics, including gauges, bar graphs, circuit plots, lap times, and text.

HDMI for Live Streaming

VBOX Video HD2 is available with an HDMI option allowing you to stream real-time video and audio to an HDMI compatible monitor, recorder or streaming device such as LiveU Solo.

VBOX Video HDMI (RLVBVDHD2-H) can be used to give live coverage of motorsport events for TV or social media, provide race teams with the ability to give instant driver feedback, or act as a rear-view camera.

The system comes with an HDMI port and locking pin to make sure our custom cable has a secure connection and will only run with the latest version of HD2 firmware (1.3.76 and higher) and setup software (1.4.259 and higher).

Real-time Graphic Overlay

RACELOGIC's range of in-car camera systems are fully synchronized and embed a real-time graphical overlay on your video, allowing you to instantly analyze your performance and pinpoint areas for improvement.

Screen elements:

Track map - Dedicated Porsche Carrera Cup dash element with speed, lap times, brake and throttle gauges - Picture-in-picture

Screen elements:

Track map - Tire temperature heat maps - Lap timing - Brake & throttle gauges - Speedometer - Rev meter - Picture-in-picture

Screen elements:

Track map - Picture-in-picture - Logo - Lap times (fastest/last/current) - Speedometer - Rev meter

Screen elements:

Track map - Logo - Lap counter - Lap times - Picture-in-picture - Speed - G-force

Powerful Analysis Software

Circuit Tools analysis software is aimed at drivers and is quick and simple to use. The software is designed to automate many tasks and present a driver with the information required to improve lap times.

Circuit Tools is now compatible with Windows, macOS and iOS devices.

Would you like to try Circuit Tools at home?
Watch this video and download the accompanying video and data files for replay in Circuit Tools.

Fastest Lap Filter

This feature is unique to Circuit Tools

The fastest lap from your latest session is automatically chosen and displayed on the graph window. The video is moved to the start of this lap.

You can compare runs from this session, or from different days, drivers or sessions simply by importing them and clicking on the relevant lap time shown in the session window.

Logged Channels

The data window displays the values of the channels which have been logged at the position of the graph cursor. By default, Speed and Delta-T are displayed.

Side By Side Video

Watch the data-synchronised 1080p video side by side in slow motion to see the lines taken by each driver. You can move the video one sample at a time with a simple key combination.

Auto Track Map and Position

(Within the AiM dash overlay)
The software automatically detects the country, circuit and track configuration from a database of over 600 circuits and uses the start/finish line information to separate the laps contained in your recorded file. It also shows your position on track as you go through the data.

Delta-Time Trace

Time difference or 'Delta-T' is a very useful channel that shows the lap time difference between two different laps, e.g. your last vs. your fastest lap or your best vs. another drivers lap. Use this to pin-point areas for improvement.
  • Fastest Lap Filter

    This feature is unique to Circuit Tools

    The fastest lap from your latest session is automatically chosen and displayed on the graph window. The video is moved to the start of this lap.

    You can compare runs from this session, or from different days, drivers or sessions simply by importing them and clicking on the relevant lap time shown in the session window.

  • Logged Channels

    The data window displays the values of the channels which have been logged at the position of the graph cursor. By default, Speed and Delta-T are displayed.
  • Side By Side Video

    Watch the data-synchronised 1080p video side by side in slow motion to see the lines taken by each driver. You can move the video one sample at a time with a simple key combination.
  • Auto Track Map and Position

    (Within the AiM dash overlay)
    The software automatically detects the country, circuit and track configuration from a database of over 600 circuits and uses the start/finish line information to separate the laps contained in your recorded file. It also shows your position on track as you go through the data.
  • Delta-Time Trace

    Time difference or 'Delta-T' is a very useful channel that shows the lap time difference between two different laps, e.g. your last vs. your fastest lap or your best vs. another drivers lap. Use this to pin-point areas for improvement.

More Features

Live Preview for Camera Alignment

Live Preview for Camera Alignment

A free Preview app allows you to check the alignment of your cameras and to set an exposure window on your phone.
Bluetooth

Bluetooth

Log your heart rate via the TICKR Heart Rate Monitor or OBD car data and display it on the video.
Free Video Editing Software

Free Video Editing Software

Our simple to use video editing software, VideoSplit, helps you share laps and data with friends and on social media.
Library of free scene files

Free Scene Files

The vehicle-specific, out-of-the-box scene files come with or without CAN parameters assigned.

Predictive Lap Timing

Predictive Lap Timing gives you an invaluable insight into how your current lap time compares with your fastest lap time.

To achieve our unrivalled accuracy, we compare two different laps using GPS position rather than distance. This means our lap time stays accurate, even if the driver takes a different line each lap. Position based delta-T is also far superior on long tracks.

The OLED display is available as an accessory or as part of a Video VBOX package.

Intuitive Setup Software

VBOX Video HD2 Setup software allows you to configure the HD2 unit, as well as the graphical overlay. For example, you can create custom dials, include your logo, and set the second camera location.

RACELOGIC offer out-of-the-box graphical overlay templates (scenes) to use with your VBOX Video HD2. The scenes are vehicle-specific and come with or without CAN parameters assigned to them.

Lap and split-time features

BEST, CURRENT, LAST, TIMED FREEZE

Track Maps

A large track map database. Scene design also possible with auto-track map.

Picture-in-Picture

Footage of the 2nd camera is displayed in sync with the data.

Scene Properties

Change parameters such as log settings, video quality and CAN inputs

Total gauge design freedom

Gauges, text and bar graphs can be associated with any logged parameter.

X & Y G-force, distance, time, height, vertical velocity displayed in any format

  • Lap and split-time features

    BEST, CURRENT, LAST, TIMED FREEZE
  • Track Maps

    A large track map database. Scene design also possible with auto-track map.
  • Picture-in-Picture

    Footage of the 2nd camera is displayed in sync with the data.
  • Scene Properties

    Change parameters such as log settings, video quality and CAN inputs
  • Total gauge design freedom

    Gauges, text and bar graphs can be associated with any logged parameter.

    X & Y G-force, distance, time, height, vertical velocity displayed in any format

Compatible with AiM & MoteC

If you are running an AiM dashboard or logger, you can record the CAN data directly from it into a VBOX Video HD2. All the AiM CAN channels have been incorporated into the VBOX database so you can select the channels in HD2 setup that you want to log.

There are a significant number of parameters available for logging, including Brake Position, Brake Pressure, Fuel level, Lateral Acceleration and Steering Angle.

A physical connection is made possible with the cables RLCAB144 and RLCAB145, which will connect directly to the AiM dashboard or the AiM Smartycam connection cable.

You can connect a VBOX Video HD2 system to a MoTeC dash logger or M1 ECU via an RLCAB015L unterminated CAN cable. MoTeC customers that use current release version i2 standard or i2Pro software will be able to align HD2 video giving a 2-camera option with fully synchronized data that can be reviewed in Circuit Tools or MoTeC software.

Using this method will also allow for a single GPS antenna to be plugged into the MoTeC device which is useful to not only save weight but also for race series that only allow one GPS antenna to be installed on a car.

Add-ons and Accessories

OLED Displays

RLVBDSP04 / RLVBDSP05-L
The perfect addition to any Video VBOX setup allowing you to view lap times as you drive. The OLED display includes our revolutionary predictive lap timing function.

Tire Temperature Sensors

RLACS272
Log tire temperatures throughout track sessions, so that you can make setup adjustments accordingly.

Micro Input Module

RLVBMICIN01L
Should you wish to log vehicle signals from a car without a CAN Bus, the Micro Input Module allows you to record one frequency (RPM) and four analogue signals.

OBD Link

RLACS228
Capture up to 11 OBD channels via this Bluetooth module which plugs into the vehicle's OBD port and can be configured through the HD2 setup software.

USB Remote Logging

RLACS237
Start/Stop logging switch with USB enabled recording.

Heart Rate Monitor

RLACS227
Log your heart rate and display it on the video.

CAN Cables

RLCABxxx
Various options such as the unterminated CAN interface cable (RLCAB015-L), OBDII CAN cable (RLCAB069), CAN splitter cable (RLCAB081)

Roll Cage Mounts

RLACS286
Solid aluminum body connected to a curved mounting plate. Bolted to the bar via supplied jubilee or worm drive hose clips.

2nd Car Accessory Kit

RLACS274
All accessories required for a second vehicle, allowing you to transfer the main unit between two vehicles.

Quick Release Bracket

RLACS258
With its quick-release catches, the RLACS258 allows for the VBOX HD2 to be mounted securely in the car but also quickly removed.

Power Supplies

RLCAB010 / RLCAB014
For connection to in-car 12 V auxiliary or cigar lighter socket (RLCAB014) or, if absent, for direct connection to a 12 V and GND (RLCAB014).

Bluetooth Remote Logging

RLACS224
This remote start/stop logging switch is paired via Bluetooth and can be conveniently mounted next to the driver.